+- auto-epc.org (https://www.auto-epc.org)
+-- Forum:
Automotive " Hardware & Tools " (https://www.auto-epc.org/forumdisplay.php?fid=44)+--- Forum: Selling Box (https://www.auto-epc.org/forumdisplay.php?fid=265)
+--- Thread: Chip-Tuning video courses - WinOLS + ECM Titanium for petrol and diesel ECU (/showthread.php?tid=15718)
Chip-Tuning video courses - WinOLS + ECM Titanium for petrol and diesel ECU - motorstate - 03-24-2023
Chip-Tuning video courses - WinOLS + ECM Titanium for petrol and diesel ECU
Each course - $649
WinOLS Petrol video course (more than 10 hours)
What inside:
1. What you'll learn in this course
2. Introduction of EFI system
3. The types of ECUs
4. What is ECU remapping and ECU cloning
5. Tools you need for Chiptuning and ECU remapping
6. The types of programmers
7. How to Read and Write ECU and Reflash
8. ECU Programming on the bench
9. Types of tuning software
10. WinOLS software
11. Engine torque categories
12. Air control category
13. Ignition timing and spark advance
14. Injection system and Injection tables
15. Turbo system categories
16. Limiters ECU
17. How to modify the tables
18. Bosch ME7 basic
19. Bosch ME9 ECU training
20. Bosch ME17 ECU training
21. Bosch MED17 ECU training
22. DTC/Fault Code Removal
23. Bosch MED17 DTC deletetraining
24. Fuel cut for pop & bang
25. Mitsubishi ECU training
26. Mercedes A200/Bosch MED17
27. Delphi MT86 ECU Tuning
28. Continental sim2k-241 ECU training
29. How to use DAMOS files in WinOLS
30. Transfer tuning files
31. Hitachi DTC delete training
32. Delphi dtc delete training
33. Basic DTC finding
34. How to Make Script in WinOLS Software
35. BMW Bosch MEVD17
WinOLS Diesel video course (more than 10 hours)
What inside
1. What you'll learn in this course
2. How a Diesel Engine Works Its Parts & Functions
3. Diesel fuel injection system
4. Common Rail Direct Injection
5. Sensors/Actuators/Control unit
6. DPF/EGR/SCR system
7. What is ECU remapping & ECU cloning
8. ECU tuning tools & tuning software
9. Types of programmers
10. How to Read and Write ECU & Reflash
11. ECU Programming on the Bench
12. Types of tuning software
13. WinOLS software
14. Torque Calculation-Torque Monitoring
15. Torque category (torque request, cranking, limiter)
16. Fuel Control Strategies
17. Start/Phase of Injection
18. Fuel quantity
19. Injection duration/time
20. Smoke limitation
21. Injection/rail pressure
22. Turbo system
23. How to modify tables
24. How to find table of Delphi CRD
25. How to modify table of Delphi CRD
26. How to find table of Denso ECU (part1)
27. How to find table of Denso ECU (part2)
28. How to modify table of Denso ECU
29. How to find table of Siemens SID803A ECU
30. How to modify table of Siemens SID803A ECU
ECM Titanium Petrol video course (almost 10 hours)
What inside:
1. What you'll learn in this course
2. Introduction of EFI system
3. The types of ECUs
4. What is ECU remapping and ECU cloning
5. Tools you need for Chiptuning and ECU remapping
6. The types of programmers
7. How to Read and Write ECU and Refl ash
8. ECU Programming on the bench
9. Types of tuning software
10. ECM Titanium software training
11. Engine torque categories
12. Air control category
13. Ignition timing and spark advance categories
14. Injection system and injection tables categories
15. Turbo system categories
16. Limiters
17. How to modify the tables
18. Practical example (Audi A3 quattro 3.2 V6 Sport)
19. Practical example (VW Beetle 2.0 TFSI)
20. Practical example (Toyota Land Cruiser Prado with Denso ECU)
21. Audi S1-Continental SIMOS (Understanding table)
22. Audi S1-Continental SIMOS (Modify table)
23. Audi TT example
24. Polaris Bosch me17 remap
25. Polaris RZR Turbo
26. Mini cooper Bosch MEVD17
ECM Titanium Diesel video course (almost 8 hours)
What inside:
1. What you'll learn in this course
2. How a diesel engine works, it's parts & functions
3. Diesel fuel injection system
4. Common Rail Direct Injection
5. Sensors/Actuators/Control unit
6. DPF/EGR/SCR systems
7. What is ECU Remapping & ECU cloning
8. ECU tuning tools and tuning software
9. The types of programmers
10. How to Read & Write ECU and Refl ash
11. ECU Programming on the Bench
12. Types of tuning software
13. ECM Titanium software
14. Torque Calculation/Torque/Monitoring
15. torque category(torque request, cranking, limiter)
16. Fuel control strategie
17. Injection catgory (timing/quantity/duration)
18. Turbocharge system
19. How to modify table of Bosch EDC16 & EDC17
20. How to modify table of Siemens SID803A
21. How to modify table of Denso ECU
22. How to modify table of Delphi CRDI
![[Image: Chip-tuning-video-courses-winols-ecm-tit...diesel.jpg]](https://i.ibb.co/ctTPYK5/Chip-tuning-video-courses-winols-ecm-titanium-petrol-diesel.jpg)
Chip-Tuning video courses - WinOLS + ECM Titanium for petrol and diesel ECU - $790
Details about the training content:
- It teaches you how to copy car files quickly with ecm titanium. (The sw and hw numbers are unimportant.)
- You can work with gasoline, diesel, atmospheric, turbo engine and any ecu. With this method,
you will be able to do all of them very easily.
- Cracked Ecm Titanium is sufficient. It doesn't need to be driver and damos.
You just need to have a device that you can import files from cars.
- You will learn how to checksum with ecm titanium and Winols
- You will be able to do the following:
Stage 1
Stage 2
Stage 3
DPF off
EGR off
Lambda off
Vmax off
Adblue off
pop bangs or anything...
Need it? Write to me to discuss the details.
RE: Chip-Tuning video courses - WinOLS + ECM Titanium for petrol and diesel ECU - motorstate - 11-17-2023
Added Chip-Tuning video courses - WinOLS + ECM Titanium for petrol and diesel ECU