auto-epc.org
BMW ISTA-D v4.19.30 - (FINAL of SEPTEMBER 2019) - Printable Version

+- auto-epc.org (http://www.auto-epc.org)
+-- Forum: The Normal Main Forum (http://www.auto-epc.org/forumdisplay.php?fid=5)
+--- Forum: Cars (Light Vehicles) (http://www.auto-epc.org/forumdisplay.php?fid=7)
+---- Forum: BMW (http://www.auto-epc.org/forumdisplay.php?fid=172)
+---- Thread: BMW ISTA-D v4.19.30 - (FINAL of SEPTEMBER 2019) (/showthread.php?tid=11471)



BMW ISTA-D v4.19.30 - (FINAL of SEPTEMBER 2019) - TestPoint - 10-06-2019

Bmw Ista-D V4.19.30 - (FINAL of SEPTEMBER 2019) BMW E AND F SERIES 1995-2019 - Diagnose & Repair Manual

[Image: McNyZmA.png]

[Image: mCDh72j.png]
[Image: 8kdO5XC.jpg]

[Image: Rqo6kfO.jpg]

[Image: cdegbOM.jpg]

[Image: 1yjZttL.png]

BMW DEALER LEVEL SOFTWARE  FOR FULL E AND F SERIES 1995-2019 BMW DIAGNOSTIC, CODING AND REPAIR MANUAL
 
- Diagnose all BMW's.
- Programming Fxx-/Ixx-/Gxx-series BMW's/Rolls Royce/Mini with ICOM.
- No launcher required!
- Hardware check disabled -can use the program on the slower laptops.
- ISTA contains all the functions required for programming vehicles of the F, G and I series and for Motorrad models with vehicle electrical system 2020 (BN2020).
- Module (ECU) errors reading and clearing
- Gearbox (transmission) and engine adaptations erasing
- Fuel injectors control, correction amount real time viewing, injector registering
- Engine mountings testing
- Mass air flow (MAF) testing and registering. Whole air system testing
- EGR system control and testing
- Turbocharger and related components control and testing
- Diesel particulate filter regeneration (DPF)
- Battery replacement
- Oil change and service interval reset
- Wiring diagrams live data, repair instructions, technical documents etc
- And much more other functions

Interface requirements
- ICOM A1 or A2, OPPS, OPS, K-Dcan E-NET cable
- Compatible with ICOM (OEM or clone), K+DCAN USB and ENET


DOWNLOAD: